Home » Products » Process Cranes » Transfer Trolleys

Transfer Trolleys

Your Biggest Helper in Ground Load Transfer…

Transfer carts are used to move a load on a horizontal surface.
They facilitate load transfer between halls in factories with multiple halls in the industry.
There are both motorized and non-motorized transfer carts.
In battery-powered transfer carts, energy is supplied via batteries.
They can be used easily in areas where overhead cranes or gantry cranes cannot reach to move loads.
Our product, also known as a dolly cart, is essentially composed of the walking mechanism of overhead cranes.
The walking mechanisms may consist of rail mechanisms, but there are also rubber-wheeled transfer carts.
Known as a rail transfer cart, this product can also be used in mines, where one end is attached to a pulling system called a winch and works at a certain angle. In these applications, idler load wagons are attached to the end of the cable and pulled horizontally or upwards at an angle with a motorized pulling winch.

Deflection is calculated at a rate of at least 1/1000 in double girder bridge constructions used with our custom manufacturing process cranes. It uses heat shields that protect the construction against heat as required.
Mechanisms are selected according to the desired lifting and execution speeds and working class.
Process Cranes are designed in the strongest and lightest way possible and manufactured in accordance with DIN norms and FEM standards
Lifting-lowering, execution gearboxes are produced by choosing the gearboxes with appropriate service factor according to parallel shaft type and fem classes.

In the main lift, auxiliary lift, trolley walking, bridge walking systems, inverter drives are used to provide non-impact movement and minimum load swing.
Within the application, phenomena such as positioning, positioning in x-y-z axes in process cranes, automatic stop-and-go movements in any direction, working time detection, electricity consumption, fault detection, remote intervention to some malfunctions can be processed.
Suitable motors, forced fans, air conditioners in the electrical room and control cabinet can be used according to the working environment.
It is stopped by electrohydraulic brakes. Emergency stop safety brakes can also be used according to tonnage and need.

The welds of the bridge beams produced using quality certified sheet metals are checked by non-destructive methods, and the dimensions are controlled according to TS-EN-1090 tolerances.
All of the outsources of the bridge beams are welded with submerged arc welding robots.
In the production of crane bridges, sandblasting and painting are applied according to world standards. Special paint applications can be made considering the working conditions of the crane. We can paint in special colors requested by our customers.
In special manufacturing process crane systems; We have radio frequency remote control and control from the cabin options.
Single or double line I beam cable trolley current reception system is preferred as current receiving festoon line along the bridge.

There is a maintenance platform in accordance with the standards on one or two beams of the bridge in order to perform the maintenance safely in custom manufacturing process crane systems.
Options such as manually locked parking brake systems, monitoring systems, wind sensors can be used according to their usage areas.
At the walking end of the bridge, there are switches to cut the current without hitting the buffers. In addition, if there is more than one bridge crane system in the same hall, sensor switches are used to prevent them from hitting each other.
Loadcell load switches used in cranes are one of the biggest measures in preventing accidents in your business. With their digital features, load information can be transferred to a screen and provide continuous information about the loaded load.
Arnikon Engineering guarantees minimum load swing, minimum wear and tear, and low maintenance costs with its products.